Program Prerequisites
A bachelor's degree in computer engineering or a closely related discipline.
Articulation Courses
Undergraduate articulation courses are required for students with bachelor's degrees in fields other than Computer Engineering. In general, all students must have completed the following undergraduate courses (or their equivalents in an accredited BSCpE program) before admission to our graduate program. Students who have taken these courses must complete the articulation courses listed below, plus all prerequisites, that they require. Grades of "B" or higher must be obtained in each articulation course. Articulation courses are not eligible for inclusion on a student's Graduate Program of Study.
- EEE 3342C: Digital Systems
- EEL 3801: Computer Organization
- COP 3502: Computer Science I
- COP 3503: Computer Science II
Plus choose ONE of the following: - COP 4331: Processes for Object-Oriented Development
- EEL 4768C: Computer Architecture
- EEL 4781: Computer Communications Networks
Degree Requirements
Required Courses: Specialization Areas
24 Total Credits
- Complete all of the following
- All students (thesis and nonthesis) are required to take at least 24 credit hours of formal courses, excluding research-related courses and independent study (XXX 6908), which emphasize their specialization area. The Computer Engineering Program supports a number of specialization areas. These specialization areas are (in alphabetical order): Computer Networks and Computer Security (CNCS), Computer Systems and VLSI Design (CS/VLSI), Intelligent Systems and Machine Learning (ISML), and Software Systems and Algorithms (SSA). For each of these areas there is a suggested list of courses. In special circumstances, courses other than those listed in a specialization area may be taken at the discretion of the student’s advisor and/or graduate program director in the form of a signed and approved Program of Study. The POS form must be approved by an adviser no later than the end of the second semester after admission. The program of study must meet all the university requirements specified in the graduate catalog and must also receive departmental-level and college-level approval. At least half of the credit hours used to meet program requirements must be at the 6000 level.
Specialization Areas- Earn at least 24 credits from the following course sets:
- arrow_drop_down Computer Networks and Computer Security (CNCS)
- CDA5106 - Advanced Computer Architecture (3)
- CDA5110 - Parallel Architecture and Algorithms (3)
- CDA5220 - Foundations of Secure Execution Environment (3)
- CDA6530 - Performance Models of Computers and Networks (3)
- CGS5131 - Computer Forensics I: Seizure and Examination of Computer Systems (3)
- CNT5008 - Computer Communication Networks Architecture (3)
- CNT6418 - Computer Forensics II (3)
- CNT6519 - Wireless Security and Forensics (3)
- CNT6707 - Advanced Computer Networks (3)
- COP5537 - Network Optimization (3)
- COP5611 - Operating Systems Design Principles (3)
- CAP6133 - Advanced Topics in Computer Security and Computer Forensics (3)
- CAP6135 - Malware and Software Vulnerability Analysis (3)
- COT5405 - Design and Analysis of Algorithms (3)
- EEE5542 - Random Processes I (3)
- EEL5780 - Wireless Networks (3)
- EEL6762 - Performance Analysis of Computer and Communication Systems (3)
- EEL6785 - Computer Network Design (3)
- EEL6788 - Advanced Topics in Computer Networks (3)
- EEL6883 - Software Engineering II (3)
- arrow_drop_down Computer Systems and Very Large Scale Integration (CS/VLSI)
- CDA5106 - Advanced Computer Architecture (3)
- CDA5110 - Parallel Architecture and Algorithms (3)
- CDA6107 - Parallel Computer Architecture (3)
- CDA6938 - Special Topics (3)
- COP5537 - Network Optimization (3)
- EEE5390C - Full-Custom VLSI Design (3)
- EEL5722C - Field-Programmable Gate Array (FPGA) Design (3)
- EEL6762 - Performance Analysis of Computer and Communication Systems (3)
- ECM6308 - Current Topics in Parallel Processing (3)
- CDA5121 - High Performance Computing and Programming (3)
- arrow_drop_down Intelligent Systems and Machine Learning (ISML)
- CAP5055 - AI for Game Programming (3)
- CAP5512 - Evolutionary Computation (3)
- CAP5610 - Machine Learning (3)
- CAP5636 - Advanced Artificial Intelligence (3)
- CAP6545 - Machine Learning Methods for Biomedical Data (3)
- CAP6616 - Neuroevolution and Generative and Developmental Systems (3)
- CAP6640 - Computer Understanding of Natural Language (3)
- CAP6671 - Intelligent Systems: Robots, Agents, and Humans (3)
- CAP6675 - Complex Adaptive Systems (3)
- CAP6676 - Knowledge Representation (3)
- EEL5825 - Machine Learning and Pattern Recognition (3)
- EEL5874 - Expert Systems and Knowledge Engineering (3)
- EEL6812 - Introduction to Neural Networks and Deep Learning (3)
- EEL6875 - Artificial Intelligence for Autonomous Systems (3)
- EEL6878 - Modeling and Artificial Intelligence (3)
- arrow_drop_down Software Systems and Algorithms (SSA)
- CAP6515 - Algorithms in Computational Biology (3)
- CGS5131 - Computer Forensics I: Seizure and Examination of Computer Systems (3)
- CNT6418 - Computer Forensics II (3)
- CAP5510 - Bioinformatics (3)
- CAP6133 - Advanced Topics in Computer Security and Computer Forensics (3)
- CAP6545 - Machine Learning Methods for Biomedical Data (3)
- CEN5016 - Software Engineering (3)
- CEN6075 - Formal Specification of Software Systems (3)
- COP5021 - Program Analysis (3)
- COP5711 - Parallel and Distributed Database Systems (3)
- COP6730 - Transaction Processing (3)
- COP6731 - Advanced Database Systems (3)
- COT5405 - Design and Analysis of Algorithms (3)
- COT6410 - Computational Complexity (3)
- COT6417 - Algorithms on Strings and Sequences (3)
- COT5600 - Quantum Computing (3)
- COT6602 - Introduction to Quantum Information Theory (3)
- EEL6883 - Software Engineering II (3)
Thesis/Nonthesis Option
6 Total Credits
- Complete 1 of the following
Thesis Option- Earn at least 6 credits from the following types of courses: EEL 6971 Thesis The thesis option requires 24 credit hours of formal coursework in one of the specialization areas and the completion of 6 credit hours of thesis. Additional requirements are as follows: - Courses must be chosen from the suggested list of courses for the student's chosen specialization area - No more than 6 credits of thesis (XXX 6971) will be counted toward the degree requirement - Fifteen credit hours (including EEL 6971 Thesis) must be 6000-level courses - Thesis students who are full time must continue to enroll in three credit hours of thesis coursework each semester until the thesis requirement is satisfied, even if they take more than the required 6 credit hours of thesis. However, only 6 credit hours of thesis will count toward the degree requirement. The College of Engineering and Computer Science requires that all thesis defense announcements are approved by the student's adviser and posted on the college's website and on the university-wide Events Calendar at the College of Graduate Studies website at least two weeks before the defense date.
Nonthesis Option- Earn at least 6 credits from the following types of courses: Additional Electives from the list above. The nonthesis option is especially suitable for part-time students. Nonthesis students must complete 6 credit hours of electives in addition to the 24 credit hours of formal coursework described above. If desired by the student and approved by the student's adviser a total of 6 credit hours can be Independent Study (XXX 6908).
Portfolio Requirement
0 Total Credits
- Students are required to complete a culminating experience. The culminating experience for nonthesis MS students is submission of their portfolio of activities by the course Withdrawal Date of the semester prior to their intended graduation. The portfolio requirements are listed on the EECS website at www.eecs.ucf.edu.
Grand Total Credits: 30
Financial Information
Graduate students may receive financial assistance through fellowships, assistantships, tuition support, or loans. For more information, see the College of Graduate Studies Funding website, which describes the types of financial assistance available at 166su and provides general guidance in planning your graduate finances. The Financial Information section of the Graduate Catalog is another key resource.
Fellowship Information
Fellowships are awarded based on academic merit to highly qualified students. They are paid to students through the Office of Student Financial Assistance, based on instructions provided by the College of Graduate Studies. Fellowships are given to support a student's graduate study and do not have a work obligation. For more information, see 166su Graduate Fellowships, which includes descriptions of university fellowships and what you should do to be considered for a fellowship.
Transfer Credits
Graduate students with a bachelor's degree in Computer Engineering from 166su may transfer up to 9 credit hours of 5000-level or
higher coursework, with grades of "B" or higher, toward the MSCpE degree. Alternatively, a maximum of 9 credit hours may be
transferred of graduate work conducted elsewhere from an accredited institution. Transfer credit must be approved by the program and the College of Graduate Studies.
Equipment Fee
Students in the Computer Engineering MSCpE program pay a $28 equipment fee each semester that they are enrolled. Part-time
students pay $14 per semester.
Independent Learning
The independent learning requirement is met by successful completion of a master's thesis or an approved portfolio of activities for
nonthesis students.
Admission Requirements
